GD Gladiator 2.0 full set

Will ship in 24 hrs.

The full set includes:
1 * Gladiator 2.0 with new liner in it
2 * Teflon plates to achieve floating slider function
Some magnets, springs, beads, washers, covering DIY needs for all modes.
Screw drivers and stickers.

Gladiator 2.0 adopts a brand new multifunctional inner liner. There are bearing, magnet slots, and spring bead slots in the new liner. Therefore, Gladiator 2.0 can be seen as a Hexagonal Haptic.

Gladiator 2.0 Full Set includes all the accessories to achieve all of the following modes.

1. Mechanical mode. This is factory mode. You can achieve different feels and sounds by replacing different springs and beads. One of the three holes is elliptical. This is a special design. You can use the elliptical hole to place special spring and bead for sound production.
2. Magnetic mode. Remove the springs and beads, and install some magnets. Each side can accommodate up to 12 magnets. But it's suggested not installing so many, otherwise it will be difficult to push. You can also try to make certain magnets attract and some magnets repel to achieve a wonderful tactile sensation.
   
3. Hybrid mode. Install springs, beads, and magnets simultaneously. You will gain a comprehensive tactile experience of two modes.
   
4. Floating slider mode. Because the full set includes 2 pcs Teflon plates, you can turn Gladiator 2.0 into a free floating slider. Actually, it's equivalent to turning back into Gladiator 1.0.
5. Vibration mode. Place a washer on the bearing and install a small amount of magnet. At this point, there will be a vibration sensation when rotating.

More gameplay is waiting for you to develop.

Important reminder: When installing Teflon plates, be sure to first place some magnets inside. If you don't put any magnet and directly embed the Teflon plate into the shell, you will find that the Teflon plate cannot be removed easily.

If you already have a Gladiator 1.0 (Not PEI or aluminum), you only need to purchase the new version of the inner liner to combine it into Gladiator 2.0.

Attention: Aluminum and PEI Gladiators cannot use the new liner. Gladiator 1.0 made of other metal materials can be equipped with the new liner.

Weight:
Ti blasted: 42g
Mokuti: 78g